Wattage: 1200W
No load speed: 1100-3500 RPM
Supplied with a ø180mm wool bonnet buff and backing pad.
The polisher is a power tool used in the finishing process, used with polishing buffs and compound sponges to yield a dramatic difference on a painted surface.
The objective of polishing is to remove imperfections in the clear-coat that
cause the paint to look dull. Surface imperfections can include swirls,
scratches, water spots, etchings, industrial fallout, oxidation, etc.
| ORDER NO. | DESCRIPTION | WARRANTY |
| POL01 | Polisher, 800W. Supplied with ø125mm wool buff | 6 Months |
| POL02 | Polisher, 1200W. Supplied with ø180mm wool buff | 6 Months |
| POL03 | Polisher, 1700W. Supplied with ø180mm sponge pad | 6 Months |
The Tork Craft polisher features a built-in variable speed control. It is advisable to use the polisher on it's lowest speed to prevent friction. Lift the polisher often away from the panel (under no-load) to allow the motor to cool down.
| ORDER NO. | DESCRIPTION |
| POL02-12 | Big gear |
| POL02-13 | Bearing |
| POL02-16 | Aluminium head |
| POL02-19 | Fixation knob |
| POL02-24 | Armature |
| POL02-29 | Field coil (stator) |
| POL02-30 | Motor housing |
| POL02-33 | Carbon brushes |
| POL02-37-38 | Speed control (switch) |
| POL02-40 | Rear handle |
| POL02-46 | Trigger switch |
1. Preparing the panel:
2. Applying the polishing compound:
3. Wash the panel when finished:
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|
