The grinding stone is cylindrical shaped to allow it to easily sharpen the gullet, side plate and cutting corner on a chainsaw blade.
Simply colour-in the side plate's bevel with a permanent marker and align the sharpening stone with the bevel and only remove the coloured in areas to reveal a new sharp edge.
QTY: 1
The chainsaw blade shouldn't be sharpened when the raker (depth gauge) is higher than the tooth's cutting corner.
The shank of the rotary cutter is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.
For improved engraving accuracy, make use of a flexible shaft connected to the rotary engraver.
Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can normally be found on the packaging.
All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.
The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|
