Drill diameter: Ø4.0mm
Packaging: Carded 1
Drill bit: TCT (Tungsten carbide tipped)
The drill bit is used to drill holes in masonry or concrete, thanks to the uniquely designed TCT (tungsten carbide tipped) point.
A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls.
TIP:
Have a wall scanner (detector) ready before drilling into walls.
CAUTION:
Do not use the drill bit with a rotary hammer. The impact energy will break
the conversion chuck.
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|